Category: Quooker

Posted on by

Quooker Tap Service & Filter Change Bishopston

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Bishopston need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Bishopston area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Bishopston Swansea SA3 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Bishopston Swansea SA3

Posted on by

Quooker Tap Service & Filter Change Gorseinon

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Gorseinon need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Gorseinon area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Gorseinon Swansea SA4 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Gorseinon Swansea SA4

Posted on by

Quooker Tap Service & Filter Change Penderry

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Penderry need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Penderry area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Penderry Swansea SA5 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Penderry Swansea SA5

Posted on by

Quooker Tap Service & Filter Change Morriston

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Morriston need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Morriston area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Morriston Swansea SA6 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Morriston Swansea SA6

Posted on by

Quooker Tap Service & Filter Change Llansamlet

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Llansamlet need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Llansamlet area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Llansamlet Swansea SA7 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Llansamlet Swansea SA7

Posted on by

Quooker Tap Service & Filter Change Llantwit Major

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Llantwit Major need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Llantwit Major area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Llantwit Major The Vale of Glamorgan CF61 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Llantwit Major The Vale of Glamorgan CF61

Posted on by

Quooker Tap Service & Filter Change Barry

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Barry need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Barry area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Barry The Vale of Glamorgan CF62 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Barry The Vale of Glamorgan CF62

Posted on by

Quooker Tap Service & Filter Change Barry

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Barry need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Barry area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Barry The Vale of Glamorgan CF63 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Barry The Vale of Glamorgan CF63

Posted on by

Quooker Tap Service & Filter Change Pembroke Dock

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Pembroke Dock need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Pembroke Dock area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Pembroke Dock Pembrokeshire SA72 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Pembroke Dock Pembrokeshire SA72

Posted on by

Quooker Tap Service & Filter Change Milford Haven

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Milford Haven need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Milford Haven area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Milford Haven Pembrokeshire SA73 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Milford Haven Pembrokeshire SA73