Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.
Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Nempnett Thrubwell need a service or filter change?
You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Nempnett Thrubwell area.
Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.
If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Nempnett Thrubwell Bath and North East Somerset BS40 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.
How will you know when your Quooker Tap Filter needs changed?
Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.
You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.
Warning Fault Alerts on Quooker Taps
Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.