Category: Quooker

Posted on by

Quooker Tap Service & Filter Change Alston

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Alston need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Alston area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Alston Cumbria CA9 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Alston Cumbria CA9

Posted on by

Quooker Tap Service & Filter Change Sedbergh

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Sedbergh need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Sedbergh area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Sedbergh Cumbria LA10 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Sedbergh Cumbria LA10

Posted on by

Quooker Tap Service & Filter Change Grange-over-Sands

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Grange-over-Sands need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Grange-over-Sands area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Grange-over-Sands Cumbria LA11 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Grange-over-Sands Cumbria LA11

Posted on by

Quooker Tap Service & Filter Change Ulverston

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Ulverston need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Ulverston area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Ulverston Cumbria LA12 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Ulverston Cumbria LA12

Posted on by

Quooker Tap Service & Filter Change Dalton-in-Furness

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Dalton-in-Furness need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Dalton-in-Furness area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Dalton-in-Furness Cumbria LA13 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Dalton-in-Furness Cumbria LA13

Posted on by

Quooker Tap Service & Filter Change Dalton-in-Furness

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Dalton-in-Furness need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Dalton-in-Furness area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Dalton-in-Furness Cumbria LA14 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Dalton-in-Furness Cumbria LA14

Posted on by

Quooker Tap Service & Filter Change Dalton Town with Newton

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Dalton Town with Newton need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Dalton Town with Newton area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Dalton Town with Newton Cumbria LA15 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Dalton Town with Newton Cumbria LA15

Posted on by

Quooker Tap Service & Filter Change Ireleth

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Ireleth need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Ireleth area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Ireleth Cumbria LA16 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Ireleth Cumbria LA16

Posted on by

Quooker Tap Service & Filter Change Kirkby Ireleth

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Kirkby Ireleth need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Kirkby Ireleth area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Kirkby Ireleth Cumbria LA17 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Kirkby Ireleth Cumbria LA17

Posted on by

Quooker Tap Service & Filter Change Millom

Quooker are one of the largest Boiling Tap companies in the world, they originated from Holland and now sell over 25,000 Quooker Taps in the UK & Ireland market alone.

Quooker Taps are known for delivery 100 Degree Boiling Water and normally installed into Residential homes throughout the UK & Ireland, Does your Quooker tap in Millom need a service or filter change?

You are in safe hands with BoilingTaps.co.uk, our network of Boiling Tap Engineers throughout the UK & Ireland, can Service and change your filters in your Quooker tap at home or work in the Millom area.

Popular models of Quooker Taps are Quooker Flex, Quooker Fusion, Quooker Nordic – Quooker Taps not only produce Boiling Water but are also available in Chilled and Sparkling versions in the popular Quooker Cube Tap.

If you are looking for a Quooker Tap Repair, Quooker Tap Service, Quooker Tap Installation or Quooker Tap Filter Change in Millom Cumbria LA18 then contact BoilingTaps.co.uk Today for assistance on your Quooker Tap.

How will you know when your Quooker Tap Filter needs changed?

Depending on the age of your Quooker Tap, it will indicate normally every 6 months to make you aware that it needs changed, The recommendation by most companies is to change and sanitise your cold water system every six months in a commercial environment, however in a residential dwelling where most Quooker taps are installed we recommend changing every 12 months, unfortunately this means though that your Quooker Tap will beep after 6 months as it believes it is needing a filter change.

You can reset this if you press and hold the button on the top of the cold water filter for 15 seconds, you should hear a double- beep and the flashing red light will disappear.This will reset the alarm for a further 6 months / 180 days.

Warning Fault Alerts on Quooker Taps

Please try resetting the Quooker by switching it off at the Q-shaped button on top of the tank and unplugging it from the socket. With older systems, the switch may also be located at the back of the tank cover. Wait 30 seconds and then plug it back in and press the Q-shaped button on top of the tank to switch it back on. The light on the tap should now come on solid. Wait about 10-15 minutes until the light goes off – the water will now be up to temperature again and ready for use. If the light is still flashing, please try a long reset; switch the Quooker off on top of the tank and then open the tap and run the water for about 3 minutes to replenish all the water in the tank. Leave the tank switched off for another 15 minutes, then switch it on again. The light on the tap should come on solid and after about 10-15 minutes the light should go off and the tap will be ready for use again. If the flashing continues or occurs frequently, please contact our service department.

Boiling Taps Repairs – Boiling Tap Maintenance – Boiling Tap Filter Changes – Boiling Tap Replacements – Boiling Tap Installations Millom Cumbria LA18